1998 Z3m Roadster Toolkit - HELP!

[AGT1953]

So,
I have a 1998 Z3M roadster and I think some of the toolkit is missing.
I am not sure about exactly what the toolkit comprises of and I am looking for guidance.
Please examine the attached picture for any missing items and perhaps post your own if you feel yours will expose my shortcomings!!

I think there is at least 2 items missing from the formed outlines.
1. A "Z' shaped item - top right.
2. An additional spanner - top left, you can see where the mouth of this open-ended chap would live when compared to the one below.

I should point out that the picture taken of the trunk area has been rotated - the rear of the car is to the left of the picture! The central battery box lip is visible at the bottom of it.



Thanks,

Andy.

 

[hard top]

Have a word with @spurs fan in a coupe as he has got some bits and bobs for sale.

 

[AGT1953]

Hi,
I already have & he has supplied what he can for me.
In fact it was his suggestion to try this approach.

Kindest regards,

Andy.

 

[Brian4]

If you type bmw Z3M toolkit into google and go on images there are a few there.
Looks like small box 10mm I think,
Z shaped bar to turn box spanners.
And looks as if the long box spanner isn't the correct one + you have one extra spanner.

The wheel brace and jack are on the other side.

 

[GazHyde]

Image shamelessly ripped from the interwebz...

 

[AGT1953]

Hi,
Now that is interesting!
There appears to be a space, bottom left, the same as mine.
However, what is that Z shaped do-dah, top left???
It seems to have a longer socket/tube spanner fitted as well!

Andy.

 

[GazHyde]

Just found this which seems more complete.

 

[AGT1953]

Yup,
Confirms my thoughts about the additional spanner space!
In fact it may be that the smaller spanner hiding below my plier-wrench is out of place!!
Many thanks!
Andy.

 

[AGT1953]

OK,
Just taken another image of my setup and it is different to the ones posted.
I have an additional spanner space - slowly losing the will to live with this!

Nop, the little spanner hiding below the pliers is to small for the form on the left side!

Andy.

 

[AGT1953]

If you type bmw Z3M toolkit into google and go on images there are a few there.
Looks like small box 10mm I think,
Z shaped bar to turn box spanners.
And looks as if the long box spanner isn't the correct one + you have one extra spanner.

The wheel brace and jack are on the other side.

Hi,
Thanks for this - it really helps.
Didn't notice your post until now.
Regards,

Andy.

 

[Aceman]

With regard to the supposed missing spanner I have gone through this myself and after looking at loads of pics of tool trays it appears BMW did several different layouts over the years but I have come to the conclusion that they didn't actually issue a spanner for that slot and it came from factory like that. My best educated guess at the size of spanner required is a 17/19mm which I have yet to source in BMW flavour although I haven't been looking for a while so maybe one is out there.

 

[AGT1953]

Hi,
I think this is a fools errant!
There appears to be as many toolkit layouts as vehicles!
I will attempt to get as much as I can but fear all the spaces will never be occupied!

Thanks for all the input!!

Regards,

Andy,
Glasgow.

 

[Steve muise]

So,
I have a 1998 Z3M roadster and I think some of the toolkit is missing.
I am not sure about exactly what the toolkit comprises of and I am looking for guidance.
Please examine the attached picture for any missing items and perhaps post your own if you feel yours will expose my shortcomings!!

I think there is at least 2 items missing from the formed outlines.
1. A "Z' shaped item - top right.
2. An additional spanner - top left, you can see where the mouth of this open-ended chap would live when compared to the one below.

I should point out that the picture taken of the trunk area has been rotated - the rear of the car is to the left of the picture! The central battery box lip is visible at the bottom of it.



Thanks,

Andy.