HardTop Calibration

[Rodders67]

Is there a step by step instruction for setting the pin and brakets on you roof brackets? Some dope was in hurry to remove his hardtop and removed three torx screws prior to learning about single screw attached through roofline on windscreen. (Don’t judge I was in hurry).

 

[t-tony]

Can you get a good view of the other side? Or, did you remove both sides the same way? A you see marks in the paint where the screws were originally even?

Tony.

 

[Rodders67]

I fiddled with screwing brackets back into original location, but it’s really difficult to keep the screws, washers top/bottom and bracket in one spot. I likely will need to get it close, then loosen and position it with second person and snug it all in place.

 

[NZ00Z3]

This doc may help.