Paintless Dent removal a recommendation

[Will_460cs]

Yesterday I got Jake from F1 Dents in to tackle the family fleet and banish all dents. He had an epic day at my house as I had lots dent of across several family cars including my E46 M3 & E91 330I touring, a Z3 M Sport, Mazda MX5 and Golf Edition 30.

The dents ranged from:
- lots of typical 3mm to 10mm car parking door dents etc

- 2 x 10cm+ creases dents, One above a wheel arch and one through 2 swages lines on the Golf.
I've had PDR done before and these were certainly both very difficult to remedy with PDR, especially given the limited access and size.

- 2 door edges that he expertly unfolded and removed the long straight creased where the inner skin had left an impression dent. These ones surprised me and I didn't think were possible.

All Expertly done, if you care about you car and understand that PDR is all about skill then I'd look no further than Jake.

Lots of cool picture of the process on:

https://www.facebook.com/F1-Dents-142976172410117/
http://f1dents.co.uk

 

[Antm72]

Have had this done on a few cars the zed was the last . The passenger door was the worse it was rippled and dented but he removed it to a flat panel. The rear arch at some point had had something dropped against it and this was dented right on the edge but again removed.
Very skilled people and great when you find good one.

 

[oldcarman]

I need this done on my car before it goes in for paint, hopefully this fall. Just want to keep the amount of filler to a bare minimum! Those people do such tedious work but what a result! Have a good sized spot on my bike tank and hope they can fix it without too much trouble. No paint cracking so fingers crossed!! Glad it worked out well for you! JIM

 

[Russell O]

Just been looking at his Facebook page,
Amazing skills from a guy who obviously cares about his work..
I know who I'm going to call when I need one.

 

[Will_460cs]

Can't recommend the guy enough! Ive used lots of PDR people before and this guy is best I have ever come across.

 

[Redline]

I have two minor dents that need doing but it doesn't justify Jake to come this far north. Am wondering if there is enough interest that we could get him to come along to the meeting a couple of weeks at Shepshed and tackle as many as needed.

Anybody up for that?

 

[Antm72]

He may do it if the works confirmed i used a guy from leicester just up the road and he was supurb used him more than once and was always very happy.
They normally attend shows but as a Sunday is usually day off it may be a go if people commit.
They normal either have a price per panel rather than dent but it depends on the individual.
A very worth while cost for anyone with dents but no paint damage i would commit but currently dent free .... Great idea