Seat Belt retainer fixed today

[DivideBYZero]

Used the heat shrink method on the passenger side, and I'm very pleased with the result. Much easier than breaking down the entire seat, and I have to do that soon to fix the broken heating element on the drivers side seat base, just didn't want to do it twice.

If anyone is interested, I used 25mm heat shrink.

 

[Boysie]

Didn't you fancy Barry Southernboys method
How do these break are you removing the seat belt a lot or do they just snap?

 

[DivideBYZero]

I don't know, it was broken by the previous owner, but there are thousands of threads about them breaking and how it's a design fault.

I don't know the method you mention, is it the velcro method?

 

[Boysie]

I thought Barry Southernboy was on here
http://www.zroadster.net/forum/viewtopic.php?f=9&t=38769&p=366582#p366582

 

[Mr-P]

I don't know, it was broken by the previous owner, but there are thousands of threads about them breaking and how it's a design fault.

I don't know the method you mention, is it the velcro method?

Its the method I use.

http://zroadster.org/forum/threads/bmw-z3-seat-belt-guide-repair.3835/#post-45132