What have you bought for your Zed this week?

ChrisD

Zorg Addict
Joined
Nov 29, 2023
Points
54
Location
Evesham
Model of Z
M44
New spark plugs to go in soon:
sp1.jpg

Along with a coolant drain/flush:
LC1.jpg

Interesting label - I shouldn't have to do this again any time soon :)
And, finally new PPF for the inner wings.
Here's a before picture - showing the scabby old PPF:
scabby PPF.jpg

If it didn't come off in hundreds of tiny pieces I'd have had it all done at the weekend.
But, between the showers, it took me a couple of hours. This is after:
new PPF.jpg

I'm not looking forward to doing the other side but I am pleased that I'm rolling back the years on this vehicle, one small job at a time.
 
Last edited:

bertiejaffa

Zorg Guru (IV)
Supporter
British Zeds
Joined
Mar 15, 2014
Points
155
Location
Manchester
Model of Z
Z3M
New spark plugs to go in soon:View attachment 351217
Along with a coolant drain/flush:
View attachment 351219
Interesting label - I shouldn't have to do this again any time soon :)
And, finally new PPF for the inner wings.
Here's a before picture - showing the scabby old PPF:
View attachment 351221
If it didn't come off in hundreds of tiny pieces I'd have had it all done at the weekend.
But, between the showers, it took me a couple of hours. This is after:
View attachment 351227
I'm not looking forward to doing the other side but I am pleased that I'm rolling back the years on this vehicle, one small job at a time.
Maybe try some Tar & Glue on that
 

baldricks mate

Regular Member
Australian Zeds
Joined
Aug 16, 2025
Points
13
Location
Riverina. NSW. Oz
Model of Z
1997 1.9L
Front middle and rear strut tower/body braces.
K&N air filter. Denso TT iridium spark plugs.
Radiator and expansion tank/cap. Water pump. Thermostat. Hoses. Temp sensor. Belts. Pulleys and tensioner - ready for an Aussie summer of 40c.
Now looking for upgraded sway bars next...
 

Delk

Zorg Guru (III)
British Zeds
Joined
Oct 9, 2018
Points
125
Location
Hemsby Norfolk
Model of Z
Z3 3.0T
ABS adaptor rings. I am colleting parts to fit a 210mm diff with E34 outter drive flanges. These have larger spline counts and will also give me larger stronger CV joints. I have the diff and outter drive flanges and was looking at modifying them to fit ABS rings when I stubbled across the adaptors already made. Will clean up my spare subframe and trailing arms this winter and once the diff is mounted sort out CV shafts.

PXL_20251103_194702176.jpg


E34 hubs.jpg
 

AntStark

Zorg Guru (III)
Supporter
British Zeds
Joined
May 15, 2021
Points
143
Location
Hampshire
Model of Z
2002 3.0 Sport
Wasn’t going to be on my list for a while but you have to do these things when opportunity presents itself..and this opportunity was to grab a mint set of outer sills from @Dave in Southampton. Never seen a second hand pair in such good condition as these before..zero rust. Came off a jap import. Granted they are not very red..but thinking I’ll give them to my local body shop to do over winter and attack my inner sills in the spring.
IMG_0802.jpeg



IMG_0800.jpeg
 

bombur

Zorg Guru (III)
Supporter
British Zeds
Joined
May 8, 2021
Points
143
Location
Porthcawl, Wales
Model of Z
Z3 1.9, Z4 E89 2.3
Wasn’t going to be on my list for a while but you have to do these things when opportunity presents itself..and this opportunity was to grab a mint set of outer sills from @Dave in Southampton. Never seen a second hand pair in such good condition as these before..zero rust. Came off a jap import. Granted they are not very red..but thinking I’ll give them to my local body shop to do over winter and attack my inner sills in the spring.
View attachment 351919


View attachment 351921
Good purchase 👌
 
Top